内陸部には、Corsair MP600 Proと同様に設計されたヒートシンクが含まれていますが、さらにいくつかあります。持続的な作業負荷の下で熱を抑えるための表面積を追加するためにカットします。ただし、14.5 x 23 x70mmのInlandのPerformancePlusは非常に厚く、取り付けようとしているM.2スロットによっては、GPUの配置を妨げる可能性があります。邪魔になる場合や、マザーボードを使用したい場合は、ただし、ヒートシンクは簡単に取り外すことができます。
画像1/4
(画像クレジット:トムのハードウェア)
画像2/4
(画像クレジット:トムのハードウェア)
画像3/4
(画像クレジット:トムのハードウェア)
画像4/4
(画像クレジット:トムのハードウェア)
At the heart of the Performance Plus is a Phison PS5018-E18 PCIe 4.0 x4 NVMe 1.4 SSD controller. Along with features such as S.M.A.R.T. data reporting, secure erase capability, and TRIM, it also features ASPM and APST support for low power consumption at idle.
Unlike Phison’s previous-generation E16, the E18 is built from the ground up tp offer greater performance capability for PCIe 4.0 drives. It leverages a tri-core primary Arm Cortex R5 architecture, along with a dual-core co-processor, which results in very fast sustained write speeds. Furthermore, there are two 8Gb SK hynix DDR4 DRAM ICs on our 2TB sample, in order to accelerate access to the logical to physical mapping tables, ensuring responsive reads.
(Image credit: Tom’s Hardware)
As for the bulk storage, we find eight packages of Micron’s 96 L TLC. There are 32 dies in total on our 2TB sample, each 512Gb in density. This flash is not quite as fast as Micron’s recently tested 176L TLC, but with it operating at 1200 MTps over the controller’s eight NAND channels, it’s fast enough to keep up with the likes of the best in many cases.